F&P 950™ Humidification System
Advanced Respiratory Humidification. Simplified.
Features and Benefits
One system for all solutions. Supporting the delivery of invasive, noninvasive/CPAP and Optiflow™ nasal high flow therapies across all patient populations.
Enhanced usability. With integrated probes and a large interactive touch screen.
Minimized condensation. Using Evaqua™ 2 expiratory, AirSpiral™ inspiratory and Thermadapt™ technologies.
Superior system performance.* Additional sensors, customizable settings and an ultra-responsive control system.
Therapy transition. With a single type of inspiratory limb and circuits with a 14-day use period, the F&P 950 System supports transition across the care continuum following the patient through to recovery.
PDF Downloads
F&P 950 System
Fisher & Paykel Healthcare has pioneered respiratory humidification for more than 50 years. The F&P 950 respiratory humidifier has evolved on the strength of our own research and 20 years of feedback generated from the MR850.
Using the F&P 950 System has flow-on outcomes in several areas
Patient care, Hospital and Caregiving
Integrated probes
Temperature and flow probes have been integrated into the inspiratory limb and sensor cartridge, contributing to easier setup of the F&P 950 System. The integrated patient-end temperature sensor is disposed of with the single-use circuit, eliminating the need for disinfection or sterilization.
Interactive touch screen
With an adult circuit connected, an interactive touch screen offers selection of Invasive, Mask, and Optiflow™ modes via a drop-down menu. While operating in either Mask or Optiflow mode, the temperature can be adjusted to support patient comfort.
Fewer assembly connections*
The number of connections is limited to enable easy assembly and decrease the potential for system alarms due to incorrect setup.
*As compared to the F&P 850 System
Thermadapt technology
The 1.75-meter-long neonatal inspiratory limb incorporates Thermadapt™ technology which eliminates the need for an unheated extension. Different heating zones enable the breathing circuit to automatically adapt to changing ambient environments, such as those found in incubators and infant warmers.
AirSpiral inspiratory
AirSpiral™ technology protects humidified gases from the ambient conditions using insulating pockets of air and integrated wall heating along the length of the inspiratory limb. Compared with a conventional inspiratory limb, this technology helps to reduce the formation of condensate, while the smoothbore internal walls improve resistance to flow.
Evaqua 2 expiratory
Evaqua™ technology minimizes condensate by allowing humidity to freely permeate through the wall of the expiratory limb while preventing the diffusion of pathogens. Compared with a conventional expiratory limb, this technology decreases condensate in the expiratory filter and helps to reduce ventilation issues caused by mobile condensate.
SensiDomes
SensiDomes™ are silicone covers that stretch over the temperature and flow probes attached to the sensor cartridge and are embedded within the wall of the humidification chamber. These provide a microbial barrier between the probes and the humidified gases, while allowing accurate measurement to occur. The probes are not exposed to humidified gases so disinfection or sterilization is not required.
Intuitive alarms
Animations or text are displayed on the touch screen when the device enters an alarm state, clearly communicating the corrective action required to troubleshoot the device.
Plus …
Circuit Type Detection
Incorrect Set-up Alarms
USB Software Upgrades
Customizable Defaults
USB Downloadable Logs
Incoming Gas Sensor
